Type: | Strain Gauge Torque Sensor |
---|---|
Installation Type: | Vertical Installation |
Contact: | Contact |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Contact rotary torque sensor FA605 is powered by a brush and can measure the positive and negative torque values. Both ends of this dynamic torque load cell are connected by keys, so it is easy to install and use. This shaft-to-shaft torque sensor measures a maximum speed of 1800 RPM and offers 0-0.1NM, 0-0.2NM, 0-0.3NM, 0-0.5NM, 0-1NM, 0-2NM, 0-3NM, 0-5NM eight torque measuring ranges to choose from.
Specifications | Technique |
Capacity | 0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5N.m |
Sensitivity | 1.0~1.5mV/V |
Zero balance | ±0.01mV/V |
Creep (30min) | ≤0.1%F.S. |
Non-linearity | ≤0.2%F.S. |
Hysteresis | ≤0.2%F.S. |
Repeatability | ≤0.1%F.S. |
Input impedance | 350±10Ω |
Output impedance | 350±10Ω |
Temp. effect on output | 0.1%F.S./10ºC |
Temp. effect on zero | 0.1%F.S./10ºC |
Insulation resistance | ≥5000MΩ/100VDC |
Recommended excitation | 5-15V |
Maximum excitation | 20V |
Compensated temp range | -10~60ºC |
Operating temp range | -30~60ºC |
Safe overload | 120%F.S. |
Ultimate overload | 150%F.S. |
Cable size | 3m |
IP Class | IP66 |
Suppliers with verified business licenses